STATIM 130.719 Clutch Kit
In stock
Specifications
Manufacturer article criteria| Hub Profile | 21,3 x 24,6 - 21N |
| Diameter [mm] | 229 |
| Clutch | Conversion from dual-mass flywheel to single-mass flywheel |
| Brand | STATIM |
| Article number | 130.719 |
| EAN | 5907659342626 |
| Weight | 18003 g |
| Product group | Clutch |
Fits these vehicles
53 vehicle versions · 3 makes · 2003–2019 · manufacturer data| Make | Model | Engine | Power (kW) | Years |
|---|---|---|---|---|
| NISSAN | CUBE (Z12) | 1.5 dCi | 81 | 2010– |
| NISSAN | CUBE (Z12) | 1.5 dCi | 78 | 2009– |
| NISSAN | JUKE (F15) | 1.5 dCi | 81 | 2010–2019 |
| NISSAN | NOTE (E11, NE11) | 1.5 dCi | 63 | 2006–2012 |
| NISSAN | NOTE (E11, NE11) | 1.5 dCi | 66 | 2010–2012 |
| NISSAN | NOTE (E11, NE11) | 1.5 dCi | 50 | 2006–2012 |
| NISSAN | NOTE (E11, NE11) | 1.5 dCi | 76 | 2008–2012 |
| NISSAN | NV200 / EVALIA Bus | 1.5 dCi 110 (M20, M20M) | 81 | 2011– |
| NISSAN | NV200 / EVALIA Bus | 1.5 dCi 90 (M20, M20M) | 66 | 2011– |
| NISSAN | NV200 Van | 1.5 dCi 110 (M20, M20N, M20M) | 81 | 2011– |
Showing 1–10 of 16 versions matching “NISSAN”, of 53 this part fits. Show all 16
OE numbers
0 original numbers issued by NISSANThe catalogue holds no original number issued by NISSAN for this part. Clear the selection above to see every make.
About STATIM 130.719
ClutchSTATIM 130.719 is a clutch kit with hub profile 21,3 x 24,6 - 21N. According to the manufacturer catalogue it fits 53 vehicle versions from RENAULT, NISSAN, DACIA, built 2003–2019. One offer is available, at €216.32.
Frequently asked
Does STATIM 130.719 fit my car?
The manufacturer catalogue lists 53 vehicle versions for this part. Choose your car and the page shows only what fits it.
Which original numbers does it replace?
No original numbers are on file for this part.
Is there a cheaper alternative?
One offer for this part. The original numbers above lead to the parts that replace it.
When will I receive it?
The delivery date is shown at checkout, before you pay.